...
geopoints ( geopoints
&
geopoints &
... )geopoints ( nil
&
geopoints &
... )geopoints ( geopoints
&
nil )
Anchor | ||||
---|---|---|---|---|
|
geopoints
merge
( geopoints,geopoints,... )
...
Returns the geopoints of the absolute value of the input geopoints. Missing values retain their value of geo_missing_value
.
Anchor asin asin
Anchor acos acos
Anchor | ||||
---|---|---|---|---|
|
geopoints
asin
( geopoints )geopoints
acos
( geopoints )
geopoints atan
( geopoints )
...
Takes the integer part of the geopoints values and extracts a specified bit (or number of bits if a second number parameter is specified), where bit number 1 is the least significant bit (lsb). A single bit will always be returned as 1 or 0, regardless of its position in the integer. A group of bits will be treated as if the first bit is the least significant bit of the result.
A few examples from the `number' number version of this function illustrate .
To extract the 1st, 2nd and 3rd bits from a number separately:
how it works:
Code Block | ||
---|---|---|
| ||
# To extract the 1st, 2nd and 3rd bits from a number separately: n = 6 # in bit-form, this is `00000110' with the least |
...
significant bit at the right |
...
flag = intbits (n, 1) # flag is now 0 |
...
flag = intbits (n, 2) # flag is now 1
|
...
flag = intbits (n, 3) # flag is now 1 |
...
# To extract the 1st and 2nd bits together to make a single number: |
...
flag = intbits (n, 1, 2) # flag is now 2 |
...
# To extract the 2nd and 3rd bits together to make a single number: |
...
flag = intbits (n, 2, 2) # flag is now 3 |
...
#To extract the 3rd and 4th bits together to make a single number: |
...
flag = intbits (n, 3, 2) # flag is now 1 |
...
The number of bits available depends on the machine architecture and Metview's compilation options, but at the time of writing it should be 32. This function does not treat missing values differently from any other values (for efficiency with large datasets).
...
geopoints
create_geo
( number )geopoints
create_geo
( number, string )
geopoints create_geo
( number, string, number )
geopoints create_geo( number, string, number, list )
geopoints
create_geo
( ... )
Creates a new geopoints variable with the given number of points, all set to default values and coordinates. It is intended that this function be used in conjunction with the set_xxx geopoints functions in order to populate the geopoints with data. If saved, the geopoints file will be in the `traditional' 6-column format. If another format is desired, supply a string as the second parameter, possible values being 'polar_vector ', 'xy_vector ', 'xyv ' and 'ncols
'. If format 'ncols
' is specified, then the number of value columns can be given as the third argument (default is 1). In this case, an optional fourth argument can be used to provide a list of names of the value columns.
...
Code Block | ||
---|---|---|
| ||
g = create_geo(8) # default geopoints format, 8 values g = create_geo(9, 'xyv') # XYV formatted geopoints with 9 values g = create_geo(4, 'ncols', 3, ['t', 'z', 'precip']) # NCOLS format with 3 named columns, each containing 4 values g = create_geo(type:'standard', latitudes: |4, 5, 6|, longitudes: |2.3, 1.1, 6.5|, levels: 850, # all rows will have 850 as their level values: |1.1, 2.2, 3.3|, times: nil) g = create_geo(type:'xyv', stnidslatitudes: ['aberdeen', 'aviemore', 'edinburgh'] ) g = create_geo(type:'xyv', |4, 5, 6|, latitudes: |4, 5, 6|, longitudes: |2.3, 1.1, 6.5|, values: |1.1, 2.2, 3.3|) |
...
list
date
( geopoints )
Extracts the date information of all the geopoints and returns it as a list of dates.
...
string
or list
db_info
( geopoints,string )
string db_info
( geopoints,string,string )
Returns information about the database retrieval which generated the geopoints. The first string parameter specifies which piece of information you would like; possible values are:
...
name
...
the name of the database system, e.g. ODB
...
path
...
the path to the database
...
query
...
a list of strings containing the multi-line data query
...
column
...
the name of the database column used to populate a given element of the geopoints. A second string must be provided, naming the geopoints element of interest - possible values are `lat ', `lon ', `level ', `date ', `time ', `value ' and `value2 '.
...
alias
...
similar to column above, but returns the name of the database alias used instead of the full column name
g = create_geo(type: 'ncols',
latitudes: |4, 5, 6|,
longitudes: |2.3, 1.1, 6.5|,
levels: 850, # all rows will have 850 as their level
times: nil,
stnids: ['aberdeen', 'aviemore', 'edinburgh'],
temp: |273.15, 269.78, 281.45|,
precip: [4, 5, 1], # lists also work, but are less efficient
speed: |2, 3, 5| ) |
Anchor dates dates
list
date
s ( geopoints )
Extracts the date information of all the geopoints and returns it as a list of dates.
Anchor db_info db_info
string
or list
db_info
( geopoints,string )
string db_info
( geopoints,string,string )
Returns information about the database retrieval which generated the geopoints. The first string parameter specifies which piece of information you would like; possible values are:
name | the name of the database system, e.g. ODB |
path | the path to the database |
query | a list of strings containing the multi-line data query |
column | the name of the database column used to populate a given element of the geopoints. A second string must be provided, naming the geopoints element of interest - possible values are `lat ', `lon ', `level ', `date ', `time ', `value ' and `value2 '. |
alias | similar to column above, but returns the name of the database alias used instead of the full column name |
Note that this information is derived from the DB_INFO section (if it exists) in the geopoints file header (see Storing Data Origin Information in a Geopoints File).
Anchor distance distance
geopoints
distance
( geopoints,number,number )
geopoints distance
( geopoints,list )
Returns geopoints with the value of each point being the distance in meters from the given geographical location. The location may be specified by supplying either two numbers (latitude and longitude respectively) or a 2-element list containing latitude and longitude in that order. The location should be specified in degrees. A geopoint with either latitude or longitude set to missing value will have a distance of missing value.
Anchor filter filter
geopoints
filter
( geopoints,geopoints )
A filter function to extract a subset of its geopoints input using a second geopoints as criteria. The two input geopoints must have the same number of values. The resulting output geopoints contains the values of the first geopoints where the value of the second geopoints is non-zero. It is usefully employed in conjunction with the comparison operators :
freeze = filter(temperature,temperature < 273.15)
The variable freeze
will contain a subset of temperature where the value is below 273.15 . The following example shows how to plot a geopoints set with different colours :
# Filter from "temperature" points at, above, below 273.15
cold = filter( temperature,temperature<273.15 )
zero = filter( temperature,temperature=273.15 )
warm = filter( temperature,temperature>273.15
# Create three symbol plotting definitions
red = psymb( symbol_colour : "red" )
blue = psymb( symbol_colour : "blue" )
black = psymb( symbol_colour : "black" )
# Plot everything
plot(zero,black,cold,blue,warm,red)
geopoints
filter
( geopoints,vector )
A filter function to extract a subset of its geopoints input using the values in a vector as criteria. The vector should contain the same number of elements as there are in the geopoints. An example, which uses a named column for the filter criteria is:
new_gpt = filter(gpt, gpt['precip'] > 5) # "gpt['precip'] > 5" returns a vector of 1s and 0s
geopoints
filter
( geopoints,number )
geopoints filter
( geopoints,list )
A filter function to extract a subset of its geopoints input using model levels as criteria.
- If the second argument is a number, the function extracts all the geopoints for which the level is equal to the number.
- If the second argument is a list of two numbers [n1,n2] , the function extracts all the geopoints for which the level lies in the n1-n2 interval.
geopoints
filter
( geopoints,date )
geopoints filter
( geopoints,list )
A filter function to extract a subset of its geopoints input using dates as criteria.
- If the second argument is a date, the function extracts all the geopoints for which the date is equal to the one specified as the second argument.
- If the second argument is a list of two dates [d1,d2] , the function extracts all the geopoints for which the date lies in the d1-d2 interval.
geopoints
filter
( geopoints,list )
A filter function to extract a subset of its geopoints input using a geographical area as criteria.
The second argument is a list of four numbers (lat/long coordinates) defining a geographical area - [North,West,South,East] . The function extracts all the geopoints that fall within the specified area.
Anchor geosort geosort
geopoints
geosort
( geopoints )
Returns a new geopoints variable that contains the input geopoints sorted geographically from North to South (and West to East in points with the same latitude value, then by height, with lowest numerical values first).
Anchor interpolate interpolate
geopoints
interpolate
( fieldset,geopoints )
Generates a set of geopoints from a field. The first parameter must contain a single field. The field is interpolated for each position of the geopoints given as a second parameter. Where it is not possible to generate a sensible value due to lack of valid data in the fieldset, the internal geopoints missing value is used (this value can be checked for with the built-in variable geo_missing_value
or removed with the function remove_missing_values
). This function will return a missing value where the geopoints have missing lat/lon.
Anchor latitudes latitudes
vector
latitude
s ( geopoints )
Extracts the latitudes of all the geopoints and returns them as a vector..
Anchor levels levels
vector
levels
( geopoints )
Extracts the heights of all the geopoints and returns them as a vector.
Anchor longitudes longitudes
vector
longitude
s ( geopoints )
Extracts the longitudes of all the geopoints and returns them as a vector.
Anchor max max Anchor min min
geopoints
max
( geopoints,geopoints )
geopoints min
( geopoints,geopoints )
Returns the geopoints of maximum (minimum) value at each point. Missing values retain their value of geo_missing_value
.
geopoints
max
( geopoints,number )
geopoints min
( geopoints,number )
Returns the geopoints of the maximum (minimum) of number and the geopoints value at each point. Missing values retain their value of geo_missing_value
.
geopoints
max
( geopoints,fieldsets )
geopoints min
( geopoints,fieldsets )
Returns geopoints of maximum (minimum) of the geopoints value and the geopoints value at each grid point or spectral coefficient. Missing values, either in the fieldset or in the original geopoints variable, result in a value of geo_missing_value
.
Anchor maxvalue maxvalue
Anchor minvalue minvalue
number
maxvalue
( geopoints )
number minvalue
( geopoints )
Returns the maximum (minimum) value of all geopoints values. Missing values are bypassed in this calculation. If there are no valid values, then nil
is returned.
Anchor mean mean
number
mean
( geopoints )
Computes the mean of the geopoints. Missing values are bypassed in this calculation. If there are no valid values, then nil
is returned.
Anchor | ||||
---|---|---|---|---|
|
geopoints mask ( geopoints,list )
Creates a geopoints variable containing point values of 0 or 1 according to whether they are inside (1) or outside (0) a defined geographical area.
The list parameter must contain exactly four numbers representing a geographical area. These numbers should be in the order north, west, south and east (negative values for western and southern coordinates). Points with missing latitudes or longitudes are considered to be outside any area. See the documentation for the fieldset version of this function to see how to compose more complex regions than a simple rectangular area.
Anchor nearest_gridpoint nearest_gridpoint
geopoints
nearest_gridpoint
( fieldset,geopoints[,string]
Note that this information is derived from the DB_INFO section (if it exists) in the geopoints file header (see Storing Data Origin Information in a Geopoints File).
...
geopoints
distance
( geopoints,number,number )
geopoints distance
( geopoints,list )
Returns geopoints with the value of each point being the distance in meters from the given geographical location. The location may be specified by supplying either two numbers (latitude and longitude respectively) or a 2-element list containing latitude and longitude in that order. The location should be specified in degrees.
...
geopoints
filter
( geopoints,geopoints )
A filter function to extract a subset of its geopoints input using a second geopoints as criteria. The two input geopoints must have the same number of values. The resulting output geopoints contains the values of the first geopoints where the value of the second geopoints is non-zero. It is usefully employed in conjunction with the comparison operators :
freeze = filter(temperature,temperature < 273.15)
The variable freeze
will contain a subset of temperature where the value is below 273.15 . The following example shows how to plot a geopoints set with different colours :
# Filter from "temperature" points at, above, below 273.15
cold = filter( temperature,temperature<273.15 )
zero = filter( temperature,temperature=273.15 )
warm = filter( temperature,temperature>273.15
# Create three symbol plotting definitions
red = psymb( symbol_colour : "red" )
blue = psymb( symbol_colour : "blue" )
black = psymb( symbol_colour : "black" )
# Plot everything
plot(zero,black,cold,blue,warm,red)
geopoints
filter
( geopoints,vector )
A filter function to extract a subset of its geopoints input using the values in a vector as criteria. The vector should contain the same number of elements as there are in the geopoints. An example, which uses a named column for the filter criteria is:
new_gpt = filter(gpt, gpt['precip'] > 5) # "gpt['precip'] > 5" returns a vector of 1s and 0s
geopoints
filter
( geopoints,number )
geopoints filter
( geopoints,list )
A filter function to extract a subset of its geopoints input using model levels as criteria.
- If the second argument is a number, the function extracts all the geopoints for which the level is equal to the number.
- If the second argument is a list of two numbers [n1,n2] , the function extracts all the geopoints for which the level lies in the n1-n2 interval.
geopoints
filter
( geopoints,date )
geopoints filter
( geopoints,list )
A filter function to extract a subset of its geopoints input using dates as criteria.
- If the second argument is a date, the function extracts all the geopoints for which the date is equal to the one specified as the second argument.
- If the second argument is a list of two dates [d1,d2] , the function extracts all the geopoints for which the date lies in the d1-d2 interval.
geopoints
filter
( geopoints,list )
A filter function to extract a subset of its geopoints input using a geographical area as criteria.
The second argument is a list of four numbers (lat/long coordinates) defining a geographical area - [North,West,South,East] . The function extracts all the geopoints that fall within the specified area.
...
geopoints
geosort
( geopoints )
Returns a new geopoints variable that contains the input geopoints sorted geographically from North to South (and West to East in points with the same latitude value, then by height, with lowest numerical values first).
Anchor interpolate interpolate geopoints interpolate
( fieldset,geopoints )
Generates a set of geopoints from a field. The first parameter must contain a single fieldfield of the input fieldset is used. The field is interpolated for each position of the geopoints result is a set of geopoints whose locations are taken from the original geopoints, but whose values are those of the nearest gridpoints in the field to the geopoints given as a second parameter. Where it is not possible to generate a sensible value due to lack of valid data in the fieldsetBy default, when the nearest gridpoint value is a missing value or the location is out of the grid area, the internal geopoints missing value is used (this value can be checked for with the built-in variable variable geo_missing_value
or or removed with the function function remove_missing_values
).
...
vector
latitude
s ( geopoints )
Extracts the latitudes of all the geopoints and returns them as a vector..
...
vector
levels
( geopoints )
Extracts the heights of all the geopoints and returns them as a vector.
...
vector
longitude
s ( geopoints )
Extracts the longitudes of all the geopoints and returns them as a vector.
...
geopoints
max
( geopoints,geopoints )
geopoints min
( geopoints,geopoints )
Returns the geopoints of maximum (minimum) value at each point. Missing values retain their value of geo_missing_value
.
geopoints
max
( geopoints,number )
geopoints min
( geopoints,number )
Returns the geopoints of the maximum (minimum) of number and the geopoints value at each point. Missing values retain their value of geo_missing_value
.
geopoints
max
( geopoints,fieldsets )
geopoints min
( geopoints,fieldsets )
Returns geopoints of maximum (minimum) of the geopoints value and the geopoints value at each grid point or spectral coefficient. Missing values, either in the fieldset or in the original geopoints variable, result in a value of geo_missing_value
.
...
number
maxvalue
( geopoints )
number minvalue
( geopoints )
Returns the maximum (minimum) value of all geopoints values. Missing values are bypassed in this calculation. If there are no valid values, then nil
is returned.
number
mean
( geopoints )
Computes the mean of the geopoints. Missing values are bypassed in this calculation. If there are no valid values, then nil
is returned.
geopoints
nearest_gridpoint
( fieldset,geopoints )
Generates a set of geopoints from a field. The first field of the input fieldset is used. The result is a set of geopoints whose locations are from the original geopoints, but whose values are those of the nearest gridpoints in the field to the geopoints given as a second parameter. Where it is not possible to generate a sensible value due to lack of valid data in the fieldset, the internal geopoints missing value is used (this value can be checked for with the built-in variable geo_missing_value
or removed with the function remove_missing_values
).
geopoints
offset
( geopoints,number,number )
geopoints offset
( geopoints,list)
Modifies the locations of a set of geopoints by specified amounts. The offsets can be specified either as two separate numbers or as a 2-element list. The original geopoints variable is unaffected; the functions return a new variable.
geopoints
polar_vector
( geopoints, geopoints )
Combines two single-parameter geopoints variables into a polar vector style geopoints variable. The first represents speed, the second represents direction. Both input geopoints variables should contain the same number of points.
geopoints
remove_duplicates
( geopoints )
Returns a new geopoints variable that contains just one instance of any duplicate geopoint. Two geopoints are considered to be duplicates of each other if the files have the same format and the points have the same coordinates, height, date, time and values.
geopoints
remove_missing_values
( geopoints )
...
If an extra parameter 'valid'
is added to the function call, then of the surrounding points, the nearest valid one is returned; geo_missing_value
will still be returned if all the surrounding points are missing. This function will return a missing value where the geopoints have missing lat/lon.
Anchor offset offset
geopoints
offset
( geopoints,number,number )
geopoints offset
( geopoints,list)
Modifies the locations of a set of geopoints by specified amounts. The offsets can be specified either as two separate numbers or as a 2-element list. The original geopoints variable is unaffected; the functions return a new variable.
Anchor polar_vector polar_vector
geopoints
polar_vector
( geopoints, geopoints )
Combines two single-parameter geopoints variables into a polar vector style geopoints variable. The first represents speed, the second represents direction. Both input geopoints variables should contain the same number of points.
Anchor remove_duplicates remove_duplicates
geopoints
remove_duplicates
( geopoints )
Returns a new geopoints variable that contains just one instance of any duplicate geopoint. Two geopoints are considered to be duplicates of each other if the files have the same format and the points have the same coordinates, height, date, time and values.
Anchor remove_missing_latlons remove_missing_latlons
geopoints remove_missing_latlons ( geopoints )
Returns a new geopoints variable that contains just the points that do not have missing latitudes or longitudes from the input geopoints variable.
Anchor remove_missing_values remove_missing_values
geopoints
remove_missing_values
( geopoints )
Returns a new geopoints variable that contains just the non-missing values from the input geopoints variable. A geopoint is considered to be missing if either its value or value2 members are missing.
Anchor set_latitudes set_latitudes
Anchor | ||||
---|---|---|---|---|
|
Anchor | ||||
---|---|---|---|---|
|
Anchor | ||||
---|---|---|---|---|
|
Anchor | ||||
---|---|---|---|---|
|
Anchor | ||||
---|---|---|---|---|
|
Anchor | ||||
---|---|---|---|---|
|
geopoints
geopoints set_latitudes
( geopoints, number or vector or list )
geopoints set_longitud
e
s ( geopoints, number or vector
or list )
geopoints set_levels
( geopoints, number or vector
or list )
geopoints set_dates
( geopoints, number or vector
or list )
geopoints set_stnids
( geopoints, list )
geopoints set_tim
e
s ( geopoints, number or vector
or list )set_valu
e
s ( geopoints, number or vector or list )
geopoints set_valu
e
s ( geopoints, number or string, number or vector or list )
...
All these functions take two or three parameters: first one must be a geopoints variable. If three parameters are given, the second should be either the index or name of the values column to update. The last parameter defines the new values, and can be a number, a vector or a list of numbers (or dates, if set_dates()
). If a number is given then all the corresponding values (latitude, longitude, level, or ...) are replaced by the given value.
...
Code Block | ||
---|---|---|
| ||
gpt['latitude'] = |30, 40, 50| gpt['value'] = |12.4, 13.3, 1.1| gpt[name_of_column_4] = |3.3, 4.4, 5.5| gpt['precip'] = |0.3, 0.2, 0.1| |
Anchor stnids stnids
list
stnids
( geopoints )
Extracts the station id strings from all the geopoints and returns them as a list.a list. If a given point does not have a station id, then a nil
will be returned in its place in the list.
Anchor subsample subsample
geopoints
subsample
( geopoints, geopoints )
Returns a geopoints variable containing the same locations (latitude, longitude and height) as the second geopoints variable, but whose values are from the first geopoints variable (or a missing value if point not found in the first variable). Note that the resulting geopoints variable is sorted in the same way as performed by the geosort() function. This means that you need to be careful if performing functions between the results of a subsample()
operation and another geopoints variable; if the locations in the two geopoints are the same, then you should geosort()
the second geopoints beforehandfunction. This means that you need to be careful if performing functions between the results of a subsample()
operation and another geopoints variable; if the locations in the two geopoints are the same, then you should geosort()
the second geopoints beforehand. Points with missing latitudes or longitudes will still be in the output, but the rule is that such a point is defined not to be at the same location as another point, even if its lat/lon are also missing. Advice: remove missing lat/lon points using remove_missing_latlons()
before using subsample()
or geosort()
.
You can use function remove_missing_values()
if you need to get rid of the missing valued points in the returned geopoints variable.
Anchor sum sum
number
sum
( geopoints )
Computes the sum of the geopoints. Missing values are bypassed in this calculation. If there are no valid values, then nil
is returned.
Anchor times times
vector
times
( geopoints )
Extracts the times of all the geopoints and returns them as a vector.
Anchor values values
vector or list
values
( geopoints )
vector or list values
( geopoints, number )
vector or list values
( geopoints, string )
Extracts the values of all the geopoints and returns them as a vector. If the values are strings, then the result is a list of strings. A value column other than the first one can be specified either by index (1-based in Macro or 0-based in Python) or by name, e.g. values(gpt, 4) or values(gpt, 'geopotential'). See the description of the NCOLS subformat on the Geopoints page for more details of storing multiple value columns. Another syntax is to use direct indexing, e.g.
a = gpt['geopotential']
Anchor value2 value2
vector
value2
( geopoints )
Extracts the second values of all the geopoints and returns them as a vector.
Anchor value_columns value_columns
list
value_columns
( geopoints )
Returns a list containing the names of just the non-coordinate value columns in the given geopoints variable.
Anchor xy_vector xy_vector
geopoints
xy_vector
( geopoints, geopoints )
...