Section | |||||||
---|---|---|---|---|---|---|---|
|
The Thermo View Editor
Type
Specifies the type of the Thermodynamic diagram to be produced. Only Tephigram is currently implemented.
Bottom Pressure
Specifies the value at the bottom of the pressure axis of the thermodynamic diagram.
Top Pressure
Specifies the value at the top of the pressure axis of the thermodynamic diagram.
Minimum Temperature
Specifies the minimum value on the temperature axis of the thermodynamic diagram.
Maximum Temperature
Specifies the maximum value on the temperature axis of the thermodynamic diagram.
Thermo Grid
Configures the background attributes of the thermodynamic diagram, please see Thermo Grid.
Point Selection
Specifies how the geographical location, for which the diagram is to be plotted, will be selected. Options are: Coordinates, Area Average and Station.
Coordinates
Specifies the geographical location for which the diagram is to be plotted. Enter the coordinates (lat/long) of a point separated by a "/" (lat/long). Alternatively, use the coordinate assist button. Only available if Point Selection is Coordinates.
Area Average
Specifies a geographical area over which an area average value will be used, instead of a point value, to produce the diagram. Enter the coordinates (lat/long) of an area separated by a "/" (top left lat and long, bottom right lat and long). Alternatively, use the coordinate assist button. Only available if Point Selection is Area Average.
Station
Specifies the location for which the diagram is to be plotted. A Stations icon should be dropped here. Only available if Point Selection is Station.
Point Extraction
Specifies the way to calculate values at the point location for GRIB thermodynamic diagrams. Options are:
Interpolate - interpolate values from the four surrounding grid points (default)
Nearest Gridpoint - use the data from the nearest grid point
Dew Point Formulation
Specifies the equation to compute the Dew Point parameter. Options are: Saturation Over Water and Mixed Phase 0 to -23.
Temperature Param
Specifies the parameter number of the temperature, if the data is a non-ECMWF. ECMWF uses specific parameter numbers different from the WMO ones.
Specific Humidity Param
Specifies the parameter number of the specific humidity, if the data is a non-ECMWF. ECMWF uses specific parameter numbers different from the WMO ones.
Lnsp Param
Specifies the parameter number of the Lnsp, if the data is a non-ECMWF. ECMWF uses specific parameter numbers different from the WMO ones.
U Wind Param
Specifies the parameter number of the U wind component, if the data is a non-ECMWF. ECMWF uses specific parameter numbers different from the WMO ones.
V Wind Param
Specifies the parameter number of the V wind component, if the data is a non-ECMWF. ECMWF uses specific parameter numbers different from the WMO ones.
Map Overlay Control
Specifies details of the overlaying of data units in the same plot. Options are Always (default), By Date, By Level, Never.
Excerpt Include | ||||||
---|---|---|---|---|---|---|
|