Section | |||||||
---|---|---|---|---|---|---|---|
|
The Vertical Profile View Editor
Input Mode
Specifies whether to derive the vertical profile for a Point or an Area. Nearest Gridpoint will take the nearest gridpoint to the point specified.
Point
Specifies the coordinates of the point for which the vertical profile is calculated. Enter coordinates (lat/long) of a point separated by a "/". Alternatively, use the coordinate assist button.
Area
Specifies the coordinates of the area over which the averages composing the vertical profile are calculated. Enter coordinates (lat/long) of an area separated by a "/" (top left lat and long, bottom right lat and long). Alternatively, use the coordinate assist button.
Bottom Level
Specifies the lower limit of the vertical profile, as a pressure level (hPa) or model level (η levels).
Top Level
Specifies the upper limit of the vertical profile, as a pressure level (hPa) or model level (η levels).
Vertical Scaling
Specifies the type of vertical axis - Linear or Logarithmic.
X Min Max
Specifies the horizontal minimum and maximum values. Default values AUTO/AUTO indicate that the minimum and maximum values will be taken from the input data.
Level Axis
Specifies the plotting attributes of the vertical axis. An Axis Plotting icon can be dropped here.
Value Axis
Specifies the plotting attributes of the horizontal axis. An Axis Plotting icon can be dropped here.
Excerpt Include Common View Parameters Common View Parameters nopanel true